Blog

How much does air duct installation cost?

If your home already has air ducts installed, there will be the added expense of that being removed first, then the new air ducts are installed. Both require the technician to work with the existing framing of the house, the HVAC system, as well as the electrical and sometimes the plumbing systems. The technician will need to make sure the entire HVAC system and air duct installation all meet building codes and requirements. 

In 2022, HVAC air duct installation for an average-sized, single-story home could range between $1,100 and $2,100 on average. A larger home or multi-story home could cost as much as $12,000 for a complete air duct installation job. 

Can you install ductwork yourself, or is it too complicated and technical?

Those numbers made some homeowners want to do the air duct installation themselves to save some money. And while air duct installation isn’t as technical as installing the HVAC system is, it isn’t recommended. And not because your HVAC technician wants to make more money off of you! If the installation isn’t done correctly, you could end up wasting money on cooled or heated air going into the attic, or worse, out the roof! 

How long does an air duct installation take?

No two homes are going to be the same. There are several factors that can determine the time it takes to install air ducts. Some can be completed in one day and others can take up to 4  days or even a week. The factors that can affect the time it takes include: 

• Design: Formulating the design is a big factor, even if there is an existing air duct layout, a new air duct installation takes some designing. A complex or intricate design takes longer to install, even more so if some of the existing ductwork is being left in place and needs repairs. Additional vents installed in various rooms can add time to the design. 
• Size: The air duct network size includes the number of ducts needed, which depends on the size of the house. The bigger the house, the more vents are needed. And if the house is multiple stories, this requires more vents. 
• Upgrading: If upgrading an existing system with newer tubing and vents, it can take some time with the fittings to get the installation correct. 
• Accessibility: Air ducts aren’t always as easily laid out as you may picture it. Some of it is often tucked away in inaccessible areas, making the installation process more challenging. 

How many years does ductwork last?

The material air ducts are made from consists of fiberglass and plastic. This combination of materials and professional air duct installation can last up to 15 years. This isn’t to say that all new air duct installation is needed at the 15^th year, but you should have it inspected and cleaned, every 2 to 3 years. If there are any holes or broken connections, they should be repaired, which may require some parts of the ducts to be replaced.

What are the benefits of an energy-efficient HVAC system? 

There are several benefits to having an energy-efficient HVAC system, but the main three benefits are: 

1. Carbon Footprint Reduced 

There are several environmental crises today, some are getting worse by the day. One of the things we can do is utilize things that reduce our carbon footprint.  An energy-efficient HVAC system does this while keeping your home comfortable. 

2. Saves Money

The term energy efficient HVAC system means you’ll only be using the energy needed to power the system. This means less electricity which keeps more money in your bank account. 

An energy-efficient HVAC system doesn’t work as hard as it used to, so the system needs less repair and will last longer. Saving you from having to make that big purchase too frequently.

What maintenance is needed to keep an energy-efficient HVAC system energy efficient? 

The key maintenance task that keeps an energy-efficient HVAC system energy efficient is to change or clean the air filter. For most systems, every 30 days is recommended, however, if you have several pets or live in a dusty area, you may need to do this every 15 to 20 days. Other steps you can do include: 

• Clean Air Conditioner Coils

There is a condenser coil within the system that collects dirt over time, and the air filter minimizes what gets to the coil.  However, the coils still collect dirt, and if they aren’t cleaned, the airflow is blocked. This keeps the coil from absorbing heat that is converted into cooled air. 

The exterior component has a condenser coil, which can get blocked by dirt dust, grass, and trash sucked up to it. This should be cleaned every month as well and make sure that grass and other foliage aren’t growing up around it. 

• Coil Fins

There are aluminum fins on the condenser and evaporator coils that can get bent easily. This blocks airflow, but by keeping them straightened out, using a fin comb, you can keep the air flowing as it needs. 

• Condensation Drain

As an energy-efficient HVAC system cools, it creates condensation which flows through drain channels into a drip pan. When the drain channels become clogged, the excess moisture can back up onto the flooring, discoloring the flooring and allowing mildew to form. 

What are the differences between an energy-efficient HVAC system and a standard HVAC system? 

Upgrading from your current HVAC system to an energy-efficient HVAC system will come at a cost upfront. However, that higher cost will be recovered over time with the energy savings. The differences that help this are: 

• SEER

The SEER (Seasonal Energy Efficiency Ratio) is how air conditioner efficiency is rated. The EPA (Environmental Protection Agency) requires every air conditioning sold today to have a SEER rating of 14 and up, whether it is labeled as high efficiency. The higher the SEER rating the higher the cost. 

• Innovation

Technology has come a long way with innovation, including features that maximize comfort levels while not damaging the environment. This is done with variable speed adjusters that allow you to improve the efficiency as it operates. High energy efficient HVAC systems today regulate humidity better today without on-on-off cycling. 

In Conclusion

If you’re considering placing your home on the market in the near future, upgrading to an energy-efficient HVAC system will be an attractive feature for prospective buyers. Couple that with added insulation in the attic and upgraded windows will make your home stand above others in the same neighborhood that doesn’t offer these upgrades.

If you’re not planning on selling, your home will be more comfortable at less cost by upgrading to an energy-efficient HVAC system. The savings each month will recoup your investment over time. By following a routine schedule of changing or cleaning the air filters, coils, and drain pan, you’ll ensure a longer lifespan of your investment. If you would like to learn more about an energy-efficient HVAC system in Lawrenceville, GA, please reach out to us at (678) 964-5617 today!

What is a ductless AC system? 

A d ductless air conditioner system, often referred to as a mini-split system, contains two components: one is outdoor, and one is indoor, which is wall-mounted sometimes. They are connected by electrical wiring and refrigerant tubing. The indoor component is what delivers cooled or heated air into the living space without any ductwork, hence the “ductless” in ductless AC systems. 

Is a ductless AC better than other ACs?

Central air conditioning cools the air with a centrally placed unit. That cooled air is distributed through air ducts, providing home a comprehensive cooled home. However, the air ducts must be installed and maintained, both an additional expense that a ductless air conditioner system doesn’t have.

Another concern with air ducts, they can be damaged and come apart, allowing that cooled air to escape into the attic. This alone makes ductless air conditioner systems more energy efficient.

What are the pros and cons of ductless AC?

A ductless air conditioning system is a new technology, and you’ll find it in commercial, industrial, and residential applications today. It is available to dual serve with both cooling in the summer and heating in the winter. 

The Pros of a Ductless Air Conditioning System: 

• Flexible and small, having one in each room if desired
• Each unit has its own thermostat. 
• Ductless means no air leaks from the air ducts
• Collects fewer contaminants and dust

The Cons of a Ductless Air Conditioning System:

• High upfront cost, up to 30% more than a central air conditioning system
• Visible in each room installed, takes from the aesthetics
• Some don’t like that the unit is inside the home, and very visible. 
• Experienced installation and service may be difficult to find

Can ductless AC cool an entire house?

Businesses and homeowners today are all about customizing and personalizing, including heating and cooling. Ductless air condition systems are the answer to this desire, they can do what central air conditioning can’t do. 

With a central unit, you need to choose the proper size to get the most benefit, and it has the additional expense of having ductwork installed and maintained too. A ductless air conditioning system is designed so you can expand as needed, and it will cool from the very bottom level of your home or business, to the highest area. How? You can use a separate ductless air conditioning system in each room or in as many rooms as needed to keep your business or home comfortable. 

Ductless air conditioning systems have multi-zone capabilities that allow the temperature to be independently controlled in each room or area.  The size is still a factor along with the following: 

• Expansion capabilities
• Size of your home
• Brand

Is a ductless system worth it?

Yes, the benefits of a ductless AC system make this one of the best choices in cooling a business or home today because it is scalable. You can install units in each room or area and set the temperature for that each room or area. They can be installed to hang from the ceiling, or they can be wall-mounted. 

Each unit will need a small hole for the refrigerant tubing that is connecting the indoor unit to the outdoor unit. They should be done by a licensed professional due to the electrical needs may require additional wiring. 

Do ductless AC units use a lot of electricity?

Ductless air conditioning systems use approximately 600 watts per hour, making them more energy-efficient than the traditional central air condition system, and the numbers prove that.  The average American household pays approximately $0.13 per kWh for electricity. This can vary between companies, location, and size of houses. 

If a ductless air conditioning system is run constantly for 24 hours, it will use around 430 kWh for the month. That is less than $60 for the electric bill. Every brand will have some variance in its energy efficiency, you’ll do yourself a favor and research them before making a purchase. 

What is an air duct?

An air duct installation is an essential part of the HVAC system. The job of the air duct system is to l distribute air throughout your home. The air duct system distributes the cooled or heated air to the vents in each room. What is the difference between air duct vs vents and are they both necessary?

Do you need air ducts in houses?

If your home has an HVAC system, aka central heating and air, yes, air duct installation is necessary or the cooled and heated air could not be dispersed throughout the house. Installing air conditioning without ducts can only be successful with individual window units.

Yes, both are necessary for a properly working air duct installation. As described above, the air ducts are where the cooled or heated air from the HVAC system is blown through and out the vents in each room. Some rooms may have more than one vent depending on the size of the room. Standing in a room, you will not see the air ducts installation, but you will see the covers over the vents. 

Where is the air duct located?

An air duct installation should always be installed within the conditioned envelope of the house. The ideal location is within the framing of the ceiling, flooring, and walls. Routine cleaning, inspections, and maintenance are recommended so they stay in good working condition, free of any blockages or collapsed sections. 

Can air ducts make you sick?

An air duct installation will require that they are professionally clean to remove the “stuff” that builds up inside them. That “stuff” includes bacteria, diseases, and viruses from the following:

• Dust and Dust Mites
• Fungi and Fungal Spores
• Mildew, Mold, and Mold Spores
• Pet dander
• People dander
• Pollen
• Insect and Rodent Feces, Nests, and Remains
• Tobacco Smoke 
• By-Products of Chemical Pollutants

All of these allergens, diseases, growths, and pollutants can affect the health of everyone living in your home, or even visitors with sensitive respiratory systems can suffer from any of the following: 

• Coughing, congestion, sneezing
• Itchy, scratchy eyes, nose, and throat
• Breathing difficulties including asthma and wheezing
• Fever
• Headaches
• Eczema, hives, or rashes
• Feeling of lethargic 

How much does it cost to install air ducts?

The average cost for air duct installation ranges between $2,000 and $7,000. Depending on the size of the home, single or multi-story, the cost could be less, or it could be more.  With ductwork costs between $18 and $27 per linear foot, there are multiple factors involved: Including removing any existing materials before installing the new components, cutting into ceilings, flooring, or walls, and the type of air duct material. 

Some examples:

• Flexible Polyester Ducts: Cost up to $4 per linear foot, this is the least expensive but has the shortest lifespan.
• Flexible Aluminum: Cost up to $5 per linear foot, durable material but lacks in energy efficiency and flexibility.
• Galvanized Steel: Cost up to $10 per linear foot, this is the most expensive, but the most durable air duct installation material. 

Other components and materials estimated costs are: 

• Vents: Averages at $150 per vent.
• Insulation: This can cost up to $4,000 depending on the type of insulation between fiberglass, the least expensive and foil-backed mineral wool, the most expensive. 
• Replacing Ductwork in Attic: Can cost up to $2,000 with insulation another $2,000.
• Replacing Ductwork in Crawl Space: As much as $25 per linear foot, an additional $6,000 for cleaning and repairing the crawl space, and a crawl space encapsulation system installed at an additional cost of $9,500.

Other modifications can increase the cost like repairing after the air duct installation is complete, installing a drop ceiling, and rerouting any existing ductwork. 

• Odd, Strange Sounds: If your air conditioning is making a shrieking noise, there are a couple of possible reasons. The fan belt may be loose, which a routine professional AC maintenance program could avoid this from happening. For the immediate time though, you need to turn the system off and call an emergency AC repair service. Another cause of a shrieking sound could be a problem with the compressor. Shut the system off immediately and call for an emergency AC repair service. 

• Strange Odors: If your air conditioner has a burning odor, it is either an electrical issue or the air conditioning system has overheated. Either way, turn the system off immediately and call an emergency AC repair service.

• No Air Flowing: If your air conditioning isn’t kicking on, or there isn’t any air flowing out, your air conditioning system is malfunctioning. Two possibilities could be the thermostat needs to be calibrated or replaced, or the problem could be the blower motor has gone out. These can be repaired by an emergency AC repair technician. Another possibility could be your air conditioning system needs to be replaced. The only way to know which of these are the problem is to call an emergency AC repair service. 

How much does emergency ac repair cost?

There are a few factors that are considered in the cost of an emergency AC repair service call such as: 

• The time of the day or night
• Holidays and weekends
• How extensive is the problem

On average, an emergency AC repair call is typically double or triple a regular AC repair service call with the rates running $150 to $250 per hour plus parts. 

Should I turn my AC off if it is not cooling?

Definitely, this should be the first thing you do after a few checks to see if you can get it cooling again. If you hear odd noises or smell anything different, turn the system off and call for an emergency AC repair service call. 

How can I cool things down if the AC is broken?

While waiting on an AC service technician, keep your home cooler with the following tips: 

• Box Fans, Ceiling Fans, Stand Fans: No, box fans and stand fans are not going to cool your house, but the circulating air will help keep you cool. You can place a container full of ice in front of box fans will make the air cooler! 

• Eat Out or Take Out: Keeping the oven and stove off will minimize the heat building up. Time to eat out or bring dinner home, or if eating at home is the only option, time to get the grill fired up! 

• Cold Showers: Yes, that can be chilling even thinking about it, but what better way to cool off than a cold shower. Let the kids play in the sprinkler and of course, if you have a swimming pool, jump in. 

• Cover the Windows: Yes, sunshine through the windows is wonderful, but it can also be heating your home up. Close the blinds and curtains for now. 

Why is my AC running but not blowing cool air?

If your AC isn’t blowing cold air, there are several things that could be the cause. There are some things you can check yourself if you know what to check if your AC is not cooling. Those things include: 

• Check the thermostat is set to cool and auto.
• Check the air filter, replace it if dirty. 
• Check the circuit breaker. 
• Check the power switch to the unit. 

If these things are all good, and you’re still not getting cold air from the unit, it is time to make an emergency AC repair call. 

What causes an AC unit to stop working?

There can be several reasons by an air conditioning unit stops working. Among those reasons are: 

• The thermostat
• The air filter
• The condenser
• The compressor

If your air conditioning system is 10 years old or older, it may be time to replace the unit! 

A natural gas heating system is more efficient than an electric heating system, so, if your home is set up for natural gas, that is the better option to choose. With that decided, you now need to choose between the three primary types of heating systems that will be the best for your home. Those three types are: 

Furnace

A furnace heating system is the most efficient, especially when powered by natural gas. A furnace heats the air with a heat exchanger and pushes it through a duct system with a blower motor. 

Not only is this the most efficient, but it is also the most affordable. The cost of a new natural gas furnace can range $2,000 up to $7,000. The biggest downside to a gas furnace is the noise level. Heating system maintenance is a little more detailed than electric choices when considering the pilot light.

Heat Pump

A heat pump system is an all-in-one system housing both air conditioning and heating, which makes it an efficient system in its own way. These take the hot air from inside your home and using refrigerant, removes the heat. Then it returns the cooled air back into your home. The heater portion works in reverse and takes the cold air from inside your home, heats it up, and then returns it to your home. 

This is an excellent air filtration system along with the heating and cooling and is quieter than the furnace heating system. However, they are on the expensive side with an average cost starting as low as $5,600 but can cost as much as $20,000. With three different varieties to choose from, you can fit your budget and needs between the air-source, geothermal, or split-duct style. Heating system maintenance is simple with the air filter changes being the biggest concern.

Boiler

Boilers are considered an old-school heating system, but they are still around, heating water up in a tank, then pumps that heated water through pipes into individual radiators. 

They are available in natural gas, the more efficient choice, or electric, the least common choice. They take up a lot of space and can cost around $10,000. When it comes to heating system maintenance, these are more finicky, and repairs are expensive.

What is the average heating system lifespan?

A gas furnace has an average life expectancy between 15 and 20 years. With proper heating system maintenance, you could get over 20 years of life expectancy. And for an electric heating system, maintenance on a regular basis could give you up to 30 years of life expectancy. 

How much to install a new heating system?

Homeowners in colder climates, like the far northeast, need a heating system that will function at any temperature. Fortunately, here in the Bonaire, Georgia area, the winters are typically not that harsh. This enables homeowners to choose a heating system that is budget-friendly as well as one that matches the power set up in the home, i.e., electric or gas. 

The average cost across the country for the heating system itself and the installation can range from $4,900 up to $10,000. This depends on which type of system you choose, the size of the home, and how much ductwork, if any, is needed. 

So – what heating system do I have?

If you’re not sure whether your heating system is electric or gas, check the front of the heating unit; you may have to open a small door. If there is a small window on the front, check through it for a blue flame, and then you have a gas-powered heating system. If there is no window, you have an electric heating system. You can also check the breaker box and if there is a circuit labeled “furnace” or “heater” you have an electric heater.

Why is my heating system not working?

If your heating system has quit working or the heating system keeps turning on and off, there could be several issues. A common issue is poor heating system maintenance, which is usually when the air filter hasn’t been changed every 30 days. Change the air filter, hit the reset button on the furnace and see if that helped. 

If not, check the thermostat and make sure it is on “heat” and “auto”. If the system is on “cool” or “off”, it isn’t going to come on. If the thermostat is programmable, try replacing the batteries and if the thermostat is older than 10 years, replace the entire thermostat. 

Other possible issues could be any of these three things: 

The Blower Capacitor

This is like a big battery that starts the furnace once the thermostat sends a message. If this component goes out, you’re not going to get any heat. With an annual heating system maintenance, this component is checked by the technician and replaced when there is indication it is about to fail.

The Refrigerant

This pertains to a home with a heat pump system. If the refrigerant level gets too low, the compressor will overheat, and the system quits working. An annual heating system maintenance with a professional service will include a refrigerant check which can keep this from happening. 

Faulty Ductwork

A heating system maintenance will include inspecting the duct work and would find ahead of time if it were broken, detached, or poorly designed and installed. Any of these things will keep the heat from dispersing through your home, even causing it to keep cycling off and on because the warmed air isn’t getting distributed correctly causing the thermostat to start and stop. 

Can a heating system cause a fire?

Absolutely, which is a tremendous part of what makes heating system maintenance so important! Over one in six home fires are caused by the heating system according to The National Fire Protection Association. That is second only to home fires started from cooking. While space heaters are the biggest cause and fireplaces right behind them, even a furnace can catch fire if the heating system maintenance is overlooked for too long. 

Can a heating system make you sick?

The heating system in your home is there to keep you comfortable. But if the heating system maintenance is ignored, it isn’t working efficiently and can cause any of the following issues: 

Recycling Particles 

Today, new homes are well-sealed and existing homes are sealed up to keep cold or hot air from leaking in or out. This is an energy bill-saving factor, but it also keeps fresh air from circulating throughout the home too. The air in our homes today has dust, pet dander, bacteria, and mold spores that are recycled and circulated continuously in our well-sealed homes. The investment of a quality air filter or an air filtration system will reduce the exposure to these things and make us healthier. 

Humidity Problems

Even the best working, best home heating system maintenance schedule will make a home extremely dry in the winter. This won’t make us sick, but it will cause the eyes, nose, skin, and throat to be irritated and uncomfortable. 

Carbon Monoxide 

Natural gas-powered heating systems that aren’t properly vented and working correctly can emit toxic carbon monoxide. This can cause various illnesses including confusion and muscle aches, and with longtime exposure, death. 

If you’re not sure why your heating system is noisy or your heating system smells like burning, then you definitely need to call a professional heating service. They can inspect the issues you’re having and make any heating repair that is needed. Or, if they determine that there isn’t any heating repair available to get you fixed up, they can advise you on the replacement unit you need. 

For now, let’s discuss those two common complaints homeowners have.

What is making my heating system noisy? 

Most of a central heating system’s components are metal, and metal contracts and expands as it cools and heats. So, that noise you’re hearing doesn’t necessarily mean you need to call for heater repair. However, you don’t want to assume it is normal and ignore it either, especially if you’ve never heard a noise coming from it before. Here are a few things to check out when you have a noisy heater system: 

• GURGLING: This is typical of a boiler-type heating system and is usually caused by the pipes or radiator having air trapped inside them. This is easily fixed by bleeding the air from the pipes, and there are many videos available online that will give you step-by-step instructions on doing this. 
• NOISY PIPES: Common in colder weather are pipes freezing and not letting the water circulate. If it is the condensation pipe that is frozen, pour warm water (though not boiling) over it to help thaw it out. Once it thaws, restart the boiler.
• TAPPING NOISE: A tapping sound can be a limescale build-up in the pipes and radiator. A non-acidic cleaner will flush that limescale out while the system is turned off. 
• HUMMING SOUND: A humming sound is often the heating element and the immersion not properly functioning. The first thing to do is check that the thermostat is working and then check the central heat pump. It may need the speed slowed down. 
• KNOCKING SOUNDS: As the water heats up in the system and begins to flow through the pipes, the pipes will expand, and then as they cool down, they contract. If the room around the pipes isn’t sufficient, it will cause a knocking sound. You can check the pipes and move them as needed to make some room. 

Why does my heating system smell like it’s burning? 

This is a common complaint with the first cold snap of the season. Every heating system, whether it is an electric heater, a furnace, or a heat pump, will accumulate dust and assorted particles while dormant for the summer. When you first turn on your system, you’ll smell that dust and the particles burning off. 

This should be short-lived though and over with after a few hours, or perhaps a day at the longest. If you’re still smelling a burning odor after that, call for heating repair service just to make sure it isn’t something worse. With a heating system annual service contract, these are things that are caught during the inspection and cleaning, eliminating this worry. 

My heating system will not turn off – why?

There are three possible reasons why your heating system isn’t turning off. Follow these three suggestions and if it still won’t turn off, schedule a professional heating repair service: 

• Thermostat: A thermostat can go bad without any warning and can often be repaired. However, if it is an older thermostat, it may be easier to replace it with a newer programmable unit. From a broken heating sensor or switch to faulty wiring, there are several possible issues with a thermostat that can keep a heater from turning off. 
• Primary Controller: If the thermostat is working, check within the heating unit next. It may be the primary controller though, at this point, you should schedule professional heating repair service. 
• Water System: For a home heater or radiator, the heat may not be turning off because of a problem with the water check valve. If this is defective, then water keeps circulating and the heat keeps heating. This heating repair is better done by a professional than a homeowner, but you can check for the issue yourself. 

Can you repair heating elements?

Not usually, as replacement is the only heating repair possible when the element is the problem. If you have determined your heating isn’t working because of the heating element, call a heating repair service for an estimate. Questions to ask yourself so you can be prepared for that call include “What heating system do I have?” With that information, they can give you a rough estimate of the cost to replace the element.

How do you know when to replace a heating system?

• The Age of the Heating System- A heating system that is 15 to 20 years old is in the range where replacement is cheaper than most heating repairs. 

• Energy Bills Increasing – Yes, our energy bills will increase every year. However, a heating system that isn’t running as efficiently as possible, even after heating repairs, should be replaced. 

• Excessive Dirt, Dust, Rust, Soot – If you are noticing more dander, dirt, dust, rust, or soot in your home and around the heating system, and you’ve changed the air filter every 30 days, it is time to replace the system. 

• Humidity Problems – Humidity is a common issue during the winter for everyone, especially in homes with wood flooring. If the air seems exceptionally dry, it may be that the heating system has reached its life expectancy. A heating repair service call for inspection and cleaning can confirm this for you. 

• Uneven Heating – If the rooms within your home are not heating evenly, or maybe one or two aren’t heating at all, it is likely time for a new heating system. You can have the air ducts cleaned and inspected first, and that may fix the problem, even having a heating repair with cleaning and inspection first is worth the cost before getting a new system. 

• Unusually Noisy – A heating system that is making louder than normal sounds or one that develops a buzz, hum, or rattle is probably experiencing a problem like internal cracks and leaks. Replacing the unit is the best thing to do in this situation. 

• Visible Cracks and Rust – If you have noticed cracks or rust developing around or inside the heating system, it needs to be replaced sooner than later. 

• Frequent Repairs – Are you having to get heating repairs every winter – perhaps two or three times a year? At this point, your heating repair technician should have already recommended a replacement. If they have, listen to them because this old unit is costing you more money than a new unit will at the end of the day. 

How do I find a leak in my air duct?

There are holes, tears, and poor connections in an average home’s air duct system. You would be hard-pressed to find a home, other than a brand new build or one with a brand new HVAC system, that didn’t have one or all of these issues. That is because up to 30% of the air circulating in your home is wasted. If you’re thinking, “not in my home”, then pause and tell us if you have noticed any of the following:

• Cooling and heating are uneven 
• Energy usage is the same, but bills are higher
• Rooms are dustier than normal and stuffy 
• Some of the air ductwork is in an enclosed area 
• Some of the air ductwork is kinked or twisted
• You can hear air escaping from the ductwork

If you think your home air duct sealing is in need of attention, here is how you identify the problem:

• Inspect the entire air duct system for connection gaps, holes, kinks, tears, or twists. Don’t forget the attic and crawl spaces.
• If you know for sure you have heard air leaking or that there is a kink somewhere, make note of it and then check the rest of the system. 
• Take stock of what you find; taking cell phone pictures is always a good backup. 

Another thing you could do is hire a professional service that will provide home air duct cleaning service. This will include air duct cleaning and sealing and come with a warranty. 

What do you use to seal ductwork?

Now that you have found some gaps, holes, or tears, how do you fix them? Well, there are a couple of different methods for home air duct sealing: 

• Duct Sealing Tape

What kind of tape do you use for ductwork? Yes, there is HVAC duct sealing tape – you may have heard it referred to as aluminum foil tape. It comes in a large roll and is found in most hardware stores and home improvement stores. This is the easiest and neatest way to get your home air duct sealing done. However, it isn’t known for longevity or performance. If your air ducts are dirty or oily, this tape won’t stick well. Try a butyl tape instead, but never use everyday duct tape because of fire ratings. 

• Mastic Duct Sealant

Mastic air duct sealant tape is a gooey substance that hardens after it is applied to the air ducts. Because this is a water-based sealant, it will clean up easier and hold up longer. It can be applied with a paintbrush or caulking gun. Note that it is intended for outdoor use, and not the air ducts inside your attic. 

• Aeroseal Duct Sealant

Mastic air duct sealant is not the easiest to use when the leak is behind a wall. For those hard to reach areas, there is aerosol duct sealant. This uses patented technology for pressurizing, identifying, and home air duct sealing every single leak within the air duct system. 

How long does duct sealant take to dry?

Read and follow the instructions that come with the sealant for the best results. Mastic will need to be allowed to dry and cure for 48 to 72 hours before turning the air back on. 

How do I stop condensation in my air ducts?

Purchasing a dehumidifier will minimize the condensation. Make sure all air ducts are unblocked and nothing is restricting airflow. Keep the air filter changed every 30 days and the air returns cleaned once a month. 

Shutdown the Computers

Today, everyone in the family may have a computer, and those are the biggest energy users, especially if you still have desktop style computers. You know those cool looking screen savers? They aren’t help your energy costs, so turn off computer monitors when not in use and especially at night. If you have laptops, turn them off when not in use.  

The Right Lighting

As you replace burned out lightbulbs, replace them with LED bulbs. Because they use one-fourth the energy of the standard lightbulb, they are more  energy efficient, and they last longer. 

Eliminate the Power Vampires

There are devices that even when they are turned off, they are still drawing energy. Those devices include the microwave, printers, scanners, and televisions. Even cell phone chargers are pulling energy when they aren’t plugged into a phone. You can tell what is using electricity by touch – if it’s warm, it’s using electricity. 

Go With Power Strips

One way to kill the power vampires is plug things into a power strip. Then you can turn off those vampires with one switch. 

Turn The Lights Off

Yes, this can be the summer energy vampire because kids don’t seem to grasp what leaving lights on can do to the energy bills. You can find videos online that explain it in simple terms. Sneak a video in the next family movie night. Set an example too!  Make sure you’re turning off lights when you leave a room. Actions speak louder than words. 

Lock Box the Thermostat

Yes, we’re talking about like they have in restaurants and probably at your office. To have an energy efficient air conditioner system, purchase a clear acrylic lock box and place it over the thermostat. Nobody but mom and dad can adjust the thermostat. If you have a smart thermostat, make sure you have a password on the system that your kids don’t have so they can’t use their smart phone to lower the thermostat. 

What are 7 ways that you can reduce your own personal consumption of energy?

Electrical energy costs, and yet every month, we’re still in shock when we open that electricity bill. The U.S. Bureau of Labor Statistics has found that Americans are spending more than $4,000 a year on our electricity and other utilities every year. Here, we have 8 energy efficient tips for your home that are easy and painless, and along with our earlier mentioned tips, can save you money: 

• The Thermostat: The Department of Energy recommends turning the thermostat down in the winter and up in the summer. Their suggested setting is 68 in the winter and 78 in the summer. Then again, you could install a programmable thermostat that will adjust that temperature up or down in time for you to get home and be comfortable,  making energy efficient air conditioner and heater.  
• Ceiling Fans: For some reason, all these home remodeling shows are getting rid of ceiling fans, and that is a huge mistake when it comes to having energy efficient air conditioners. The DOE and their Energy Star program have found that by having a ceiling fan blowing counter-clockwise during the summer, it pulls the hot air up and away from you. Reverse that spin in the winter and push the warm air down where you need it. 
• Your Appliances: As you replace your appliances, go with an Energy Star certified replacement. From washers & dryers to refrigerators & freezers, the dishwashers and more, that Energy Star label is your friend when it comes to energy efficiency, including energy efficient air conditioners. 
• Conserve Water: As you replace faucets and other water using fixtures in your home, replace them with low-flow style. This includes all the faucets, the shower, and the tub. When you’re washing dishes or brushing your teeth, don’t leave water running.   Every drop and stream  of water you can save not only saves you money but contributes conserving a valuable resource.
• Seal and Insulate: A home that is well-insulated will give you the best energy efficient air conditioner and heating system. Check the attic and if you see the floor of the attic, you need more insulation. 
• The Filters: Keep a routine of changing or cleaning the filter of your HVAC or window units. An energy efficient air conditioner can’t do its job with a dirty filter. Don’t forget to empty the clothes dryer filter after each laundry load too. Small things add up and make a big difference.
• Keep Doors Closed: Don’t stand in front of the frig with the door open for more than 30 seconds and teach the kids the same. When you’re not using your fireplace, keep the damper closed and during the hot part of the day, close the blinds and curtains. 
• The Surroundings: By strategically placing trees around your home, you’ll help that energy efficient air conditioner and heating system. A large deciduous tree planted in the right place will reduce your cooling expense by one-fourth. During the winter, trees on the north side of your home will give you a windbreak from those northerners. 

At what temperature AC consumes less power?

During the winter, if you have your thermostat set at 72 degrees normally, gradually lower it to 68 degrees. Just those 5 degrees difference can save you as much as 3% on your energy bill. The same is true with making an energy efficient air conditioner but go up gradually 5 degrees to a warmer setting.

Is it cheaper to run your AC all day?

In general, yes, it is cheaper to leave your air conditioner on all day during the hottest part of the summer. What is not cheaper or efficient is leave it on full blast. This will not only use more electricity but wear your air conditioner out faster too. 

These are each an energy efficient air conditioner unit, some using the heat pump method. Each of these will have their usage cost expectations that you should take into consideration. Call (678) 964-5617 today for your energy efficient hvac installation in Lawrenceville, GA.

Indoor Air Quality Monitor

This device monitors the indoor door air quality of your home or office. This is the easiest way to do this, and you’ll have consistent monitoring to keep tabs on the improvements you make. 

Mold Air Test 

Mold is a common pollutant in homes, and we don’t always realize we have any. With this device, you’ll find out is you do have any then you can set out to find where its coming from and take care of the problem causing it.

Carbon Monoxide Alarm

Carbon monoxide is colorless, odorless, and tasteless, yet it will kill you quickly if you’re exposed to any large amount for any period of time. This device will tell you if you have any and then you can find where its coming from and take care of the problem. If you have any gas powered appliances like cook stove, clothes dryer, or heating, your home is at a high risk for carbon monoxide poisoning. 

Radon Tester

Radon is also colorless, odorless, and tasteless, making it completely undetectable like carbon monoxide. This built detection device alert you to any radon exposure in your home so you can get it sealed off. It is usually coming from the foundation through cracks in the floor and hoovers there. 

How can I test the air quality in my house for mold?

In addition to the mold air test device we listed above, another method you can with household products. Because mold spores can be everywhere, and if your home has a musty odor, there is probably damp organic surfaces that are growing colonies of mold. 

Use your HVAC air filter or ductwork for mold growth testing with the following steps: 

• With a rinse solution, dampen a sterile sponge and wipe a one area of the air filter or the supply duct vent.
• Put the sponge in a clean container and pour the rinse solution over it.
• Shake that rinse container then pour the contents in a cup.
• The test kit you purchased with the rinse solution will have a chart that you can compare the solution color you poured out. The chart will tell you if there is mold inside the air filter or duct work, which means there is mold in the air of your home. 

What are the symptoms of bad air quality in the home?

If you’re concerned about the health and well-being of your family, checking the indoor air quality is a great place to start. Indoor air quality problems can result from building materials and furnishing reacting to each other, activities taking place inside, and the climate. Some symptoms that are commonly reported by anyone bothered by the indoor air quality are:  

• Dryness and irritation: eyes, nose, skin, and throat
• Fatigue and Headaches
• Shortness of breath
• Allergies and hypersensitivity
• Sinus congestion issues
• Coughs, sneezing
• Dizziness, nausea

Poor air indoor quality doesn’t affect people right away. They be at work or home for a few hours before they notice these issues. Then when they leave, those symptoms improved. These same symptoms are also associated with the common cold, the flu, and COVID which makes indoor air quality testing even more important. 

How can I naturally purify the air in my home?

Here, we offer six ways you can purify the air in your home naturally: 

1. Salt Crystal Lamp – A Himalayan pink salt lamp will purify the air in your home naturally by pulling toxins out of the environment and neutralizing them. 
2. Beeswax Candles – Beeswax candles ionize the air and neutralize toxic compounds and contaminants, improving the indoor air quality with a slow burn.  
3. Houseplants – the relation between indoor air quality and plants has been known for decades! 
4. Activated Charcoal – Activated charcoal can help purify the indoor air quality with its absorptive and odorless properties while eliminating toxins too. 
5. Proper ventilation – Opening the windows will likely let pollution in along with “fresh” air, so have trickle vents installed instead. They improve the indoor air quality by purifying and recycling the indoor air. Turn on the bath and kitchen exhaust fans periodically to pull indoor pollutants out. 
6.  Essential Oils – Cinnamon, clove, lemon, oregano, rosemary, thyme, and tea tree essential oil flavors kill bacteria, fungi, mold and viruses, all which can lower the indoor air quality of your home. 

Following the recommendations and steps we covered, you will gain several indoor air quality benefits like: 

• Reduce allergens and pollutants.
• Breathe and sleep easier.
• Odors eliminated. 
• Improve HVAC efficiency.

Need help with your indoor air quality in Lawrenceville, GA? Call (678) 964-5617 today for expert service.